Nardi Compressori
Medical and Dental Air
Oil-free compressors, dryers and suction for clinics, dental practices and laboratories.
The Nardi medical range is designed for the dental and medical sector: oil-free compressors with tanks painted inside with corrosion inhibiting epoxy powder, integrated absorption dryers, and silenced cabinets for installation close to the treatment room.
Every unit is built to order in Italy.
The Range
Compressors for Every Practice
Choose by the number of chairs or the air demand of your laboratory, then by tank, noise and dryer.
Compact entry model
Oil-free on a 25 L tank, sized for a single pneumatic dental unit.
- Tank
- 25 L
- Motor
- 0.75 HP
- Noise
- 52 to 62 dB(A)
Small clinics
Oil-free at 1.5 or 2.0 HP, with or without an integrated D400 dryer.
- Tank
- 25 L
- Motor
- 1.5 to 2.0 HP
- Pressure
- 8 bar
More air reserve
1.5 to 2.5 HP on a 50 L tank, the 2.5 HP with a four cylinder block.
- Tank
- 50 L
- Motor
- 1.5 to 2.5 HP
- Pressure
- 8 bar
Small footprint, CAD-CAM ready
A 90 L vertical tank. The 3.0 HP models are the CAD-CAM line, working at 10 bar with the D600 dryer.
- Tank
- 90 L vertical
- Motor
- 2.0 to 3.0 HP
- Pressure
- 8 or 10 bar
Low horizontal tank
1.5 or 2.0 HP on a low, horizontal 50 L tank, with or without the D400 dryer.
- Tank
- 50 L
- Motor
- 1.5 to 2.0 HP
- Pressure
- 8 bar
Horizontal, CAD-CAM ready
A horizontal 90 L tank at 2.0 to 3.0 HP, single or three phase, up to 10 bar.
- Tank
- 90 L
- Motor
- 2.0 to 3.0 HP
- Pressure
- 8 or 10 bar
Silenced, compact
The Extreme 2 in a sound-insulated cabinet at 66 to 67 dB(A), on a 25 or 50 L tank.
- Noise
- 66 to 67 dB(A)
- Tank
- 25 or 50 L
- Motor
- 1.5 to 2.0 HP
The quietest cabinet
A fully enclosed silenced cabinet at 59 to 62 dB(A), on 30 to 90 L tanks, including CAD-CAM models.
- Noise
- 59 to 62 dB(A)
- Tank
- 30 to 90 L
- Motor
- 1.5 to 3.0 HP
Multi-chair clinics and laboratories
Up to three pump units on a 270 or 500 L tank, run in rotation by the LP Control Device.
- Tank
- 270 or 500 L
- Motor
- 3.0 to 9.0 HP
- Pressure
- 10 bar
Air Treatment and Suction
Complete the Installation
Dry and filter the air at the point of use, and add suction for the chair.
Absorption air dryers
Dryers for compressors supplied without one, with pressure dew points from -5 °C to -70 °C.
- Dew point
- -5 to -70 °C
- Air
- 300 to 600 L/min
- Pressure
- 10 bar
Filter depurators
Two stage filtration, 5 and 0.01 μm, in 1/4 and 1/2 inch connections.
- Filtration
- 5 + 0.01 μm
- Air
- 460 or 990 L/min
- Sizes
- 1/4 or 1/2 in
Dental suction systems
Mobile cabinet, compact semi-wet and open versions for 1 to 10 chairs.
- Chairs
- 1 to 10
- Supply
- 110 to 230V
- Formats
- 3
Plan Your Clinic Air Supply
Tell us how many chairs or what equipment you run, where the compressor will sit and your supply voltage, and we will come back with a configuration and a quote.
Request a QuoteMedical and dental air systems designed and built in Italy by Nardi Compressori.