Nardi CNG natural gas compressor range, frames C, M and MX
Nardi CNG 5.0 natural gas compressor
Nardi CNG 10.0 natural gas compressor
Nardi CNG 5.0 components cutaway
Nardi CNG compressor, frame C

Nardi CNG Natural Gas Compressor

  • In Stock - Ready to Ship
  • Custom Order - See Details Below
Request a Quote
/
Model

Some Nardi units are configured or built to your specification; others are standard models we order in from the factory based on your selection. Custom Order items are confirmed and paid for at checkout, then fulfilled on the lead time below.

Lead time for Nardi products:

Lead time depends on the product. Replacement parts, filters, and accessories typically ship within days to a couple of weeks. Built-to-order units, such as Pacific Series compressors, take up to 4 to 6 weeks to build at the Nardi factory in Italy. From there, shipping to Canada takes:

  • Approximately 3 weeks by sea freight (7 to 9 weeks total)
  • Approximately 1 week by air freight, priced on request (5 to 7 weeks total)

What happens next:

  • Payment secures your place in the fulfillment queue
  • You receive an order confirmation with your final specification
  • We coordinate with Nardi to confirm your order and expected ship date
  • Shipping confirmation and tracking follow when your order leaves the factory or warehouse
  • If your timeline changes, we reach out proactively


Need expedited shipping?
Use the Request a Quote button above. We'll confirm air freight options and cost, then send a formal quote for your approval.

The Nardi CNG series draws natural gas from a low pressure distribution line and compresses it to a maximum of 350 bar, to refuel natural gas vehicles directly or to fill high pressure storage. Six models in three frames deliver from 3 to 36 m³/h. CNG 2.8, 3.8, 5.0, 7.5 and 10.0 are built to the ATEX Directive.

Models

  • CNG 1.0, frame C, 50 L/min (3 m³/h), 2.2 kW
  • CNG 2.8, frame C, 170 L/min (10 m³/h), 4 kW, ATEX
  • CNG 3.8, frame C, 233 L/min (14 m³/h), 5.5 kW, ATEX
  • CNG 5.0, frame M, 300 L/min (18 m³/h), 7.5 kW, ATEX
  • CNG 7.5, frame MX, 450 L/min (27 m³/h), 11 kW, ATEX
  • CNG 10.0, frame MX, 600 L/min (36 m³/h), 15 kW, ATEX

Standard equipment

  • Three stage compressor block with oil pump lubrication
  • Electronic control panel that monitors temperature, oil level, current draw, inlet and outlet pressure, faults and the service schedule
  • Delivery pressure adjusted for outside temperature during direct vehicle refuelling
  • Filling hose and nozzle depressurised at the end of each fill, with the gas recovered rather than vented
  • Sound insulated cabinet
  • Filling hose for natural gas
  • Suction filter on CNG 1.0 to 5.0, soft start on CNG 7.5 and 10.0

Supply voltage

  • 240V single phase, 60 Hz
  • 208V three phase, 60 Hz
  • 480V three phase, 60 Hz
  • 600V three phase, 60 Hz

Options

  • Soft start on CNG 1.0 to 5.0
  • NGV1 filling nozzle, P30 (200 bar) or P36 (250 bar)
  • Filling hose, 6, 10 or 15 m
  • Additional pressure and temperature sensors
  • External 50 micron suction filter on CNG 7.5 and 10.0
  • 270 L gas recovery buffer on CNG 5.0
  • PAC 3 or double PAC 3 filtration for methane on CNG 7.5 and 10.0

Built to order in Italy. Every CNG compressor is quoted. Model, gas supply pressure, filling connection and supply voltage are confirmed with you on your quote.

See the Specifications tab for full technical specifications.

SpecificationCNG range
GasNatural gas from a low pressure distribution line
ATEXBuilt to the ATEX Directive on CNG 2.8, 3.8, 5.0, 7.5 and 10.0
Outlet pressure350 bar maximum
Inlet pressure10 to 500 mbar (CNG 1.0), 20 to 500 mbar (CNG 2.8, 3.8), 50 to 650 mbar (CNG 5.0, 7.5, 10.0). 20 mbar inlet on request
Delivery50, 170, 233, 300, 450 and 600 L/min (3, 10, 14, 18, 27 and 36 m³/h)
Stages3
Motor2.2 kW (CNG 1.0), 4 kW (CNG 2.8), 5.5 kW (CNG 3.8), 7.5 kW (CNG 5.0), 11 kW (CNG 7.5), 15 kW (CNG 10.0)
Electrical supply240V single phase, 208V, 480V or 600V three phase, 60 Hz. Confirmed for your model on your quote
FramesC (CNG 1.0, 2.8, 3.8), M (CNG 5.0), MX (CNG 7.5, 10.0)
Filling connectionNGV1 P30 (200 bar) or P36 (250 bar) nozzle
Noise62 dB(A) (CNG 1.0), 65 dB(A) (CNG 2.8, 3.8, 5.0), 68 dB(A) (CNG 7.5, 10.0)
Weight205, 215, 230, 275, 415 and 430 kg, CNG 1.0 to 10.0
Dimensions (L x W x H)C 75 x 85 x 110 cm, M 80 x 110 x 140 cm, MX 83 x 150 x 174 cm
Country of originItaly
SourceNardi CNG brochure (Rev 04/2026) and PLHP-CNG-26 rev.01 price list (January 2026)

Brand: Nardi Compressori

Category:

SKU: NRD-CNG-1.0

Shipping costs and timelines are calculated at checkout. Oversized, hazmat, and international orders ship by freight and are quoted separately. See our full Shipping Policy for details.

Request a Quote

We will prepare a quote for the configuration below and email it to you. No payment is taken now.

Thank you!

Your quote request has been sent. We will be in touch shortly.