Nardi Compressori
MultiPower Oil-Free Compressors
Modular oil-free air, with one, two or three pumps on a 270 L or 500 L tank.
MultiPower builds a stationary oil-free system from Extreme 4 pump units of 2.2 kW (3 hp) each. Fit one, two or three pumps on the same frame and tank, so the system matches the air demand of a shop or production line.
With the LP Control Device, the pumps start and stop in sequence as demand changes, share running hours evenly, and step in for one another if a motor trips. Every unit is built to order in Italy.
Configurations
Two Tank Sizes
Choose the tank first, then the number of pumps and the control.
One to three pumps
The compact frame, available with one, two or three pumps at 10 bar.
- Power
- 3, 6 or 9 hp
- Intake air
- 600 to 1,800 L/min
- Weight
- 116 to 198 kg
Two or three pumps
The larger receiver for longer run times between starts, with two or three pumps at 10 bar.
- Power
- 6 or 9 hp
- Intake air
- 1,200 to 1,800 L/min
- Weight
- 220 to 253 kg
Choosing the Control
Each MultiPower comes with either a pressure switch or the electronic LP Control Device. The 21 bar build pairs two stage pumps with the same tanks.
Pressure switch
Simple on and off control by system pressure, offered on the 3 hp and 6 hp builds.
LP Control Device
Touch display control that stages up to three pumps, rotates running hours, and shows maintenance reminders and alarms.
21 bar build
Two stage Extreme 4 pumps for higher pressure work, on the 270 L or 500 L tank.
Tell Us About Your Air Demand
Tell us the air your shop or line uses through the day, the pressure you need and the power supply on site, and we will come back with a configured quote.
Request a QuoteCompressors designed and built in Italy by Nardi Compressori.