DIVESOFT Analyzers, Sensors and Flow Limiters
Price Reference
MSRP is the Maximum Recommended Retail Price in Canadian dollars, read live from current product pricing. Your dealer discount is issued separately and does not appear here.
Check the website before you order. Prices change. A printed or saved copy of this page is a snapshot, not a quotation. Current pricing sits on the product page at tidalflowsystems.com.
Price revision pending. Divesoft has advised a revision to its price list expected in September 2026. The percentage and scope are not yet confirmed. Quotes extending beyond that point must be confirmed with Tidal Flow Systems.
Analyzers
Gas analyzers for oxygen, helium and carbon monoxide. Helium is measured acoustically on SOLO, He/O2 and ECHO, so only the oxygen cell is ever consumable.
Pocket nitrox analyzer that pairs with the Divesoft app over Bluetooth and runs offline. Order it complete with the Divesoft R22S cell, or without one so a serviceable R22 sensor pulled from a rebreather can be reused. Both include the 75 x 150 zipper case.
Handheld oxygen analyzer with MOD readout at 1.2, 1.4 and 1.6 bar, automatic calibration, integrated thermometer and pressure sensor, and a rechargeable Li-Ion battery. Divesoft can later upgrade it to a full SOLO with helium measurement.
| Item | MSRP (CAD) |
|---|---|
| DS-8302 | $797.95 |
Oxygen and helium analyzer for trimix. Helium is read by speed of sound, so that sensor is never replaced. Carries a blending calculator, argon identification and a FOUL AIR warning for hypoxic mixes.
| Item | MSRP (CAD) |
|---|---|
| DS-8300 | $1,392.95 |
Fill-station analyzer for oxygen and helium. Connects to a compressor for continuous monitoring with alarm and relay output, and reads voltage and resistance through optional measuring modules.
| Item | MSRP (CAD) |
|---|---|
| DS-8313 | $1,745.95 |
Bluetooth analyzer covering oxygen, helium and carbon monoxide. Choose the electrochemical R22S cell or the maintenance-free DVO2 solid state sensor, and the analyzer alone or as a set with the Professional Flow Limiter Mk2 and hose.
Flow Limiters
Controlled-flow sampling hardware for cylinder valves and inflator connections. The connection hose is listed here rather than under Accessories, because three of these four limiters do not work without it and it is not included with any of them.
Combines the relief valve and the sampling nozzle in one mechanism, so closing the nozzle vents trapped gas before the device shuts.
Do not forget the hose. This limiter needs DS-8009 Connection Hose and does not include one. Add it to the order.
Joins the Professional Mk2, QD and CCR Liberty limiters to the analyzer inlet. Cylindrical low-pressure connection, 5.8 mm.
Inflator-hose connection for Divesoft analyzers. 0.2 L per minute at 10 bar.
Add DS-8009. Hose not included.
DIN G5/8 push connector with flow set at the cylinder valve. Included with Analyzer SOLO O2, and the one limiter here that needs no hose.
Inflator-hose connection for CCR Liberty. 0.6 L per minute at 10 bar.
Add DS-8009. Hose not included.
Accessories
Sensors and carry cases for the analyzer range.
Galvanic cell with three-pin Molex connector. Fits every analyzer in this list.